Add a Wood Pergola to Your Landscape!

1. Locate. Establish The Blog posts. When you’ve found the ideal location for your new pergola, you will should locate and also put four posts. You could get a post-hole digger at a practical rate at your regional hardware shop, or you can make the task much easier with an auger. You will want to dig your holes 12″ broad as well as concerning 2′ deep. Add some loosened rock or gravel to the bottom of each opening for proper drainage. Position your 4×4 blog posts into each hole, ensuring they are totally level all over. Pick up numerous bags of Quikrete ®, blend with water, and established the articles according to the directions.

2. Connect Joist Beams. Use 2×10 lumber for your joist light beams as well as cut them to Cut joist beam of lights from 2×10 boards and also connect them throughout the set articles. You could obtain innovative with completions of the joist light beams using a jigsaw to reduce an ornamental pattern in the beam ends. Use your imagination. Secure the beams in place while you drill out the holes in the joist light beams and articles. Finally, affix the beam of lights to the blog posts with 3″ lag bolts.

3. Cut And Affix The Stringers. Usage 2×6 boards to span the articles and overhang the joist beams. Once more, you can obtain innovative here by using a jigsaw for an attractive cut and also appearance. Stringers should be equally spaced with 3″ deck screws (galvanized).

A pergola gives an attractive refuge to your home’s landscape. Developing a pergola is a good, weekend DIY project for lots of house owners, but make sure to call a professional contractor if the task’s a bit too much for your skillset.


Leave a Reply

Your email address will not be published. Required fields are marked *